A Guide to Wood Science
The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. Other products are put alongside wood for easy testing and study. The wood is checked against the other materials properties, performances, value, and work-ability. Wood has many advantages and this technology takes the advantages and utilizes them. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Once a tree has been cut down another can be planted in the same spot. Timber can be utilized in very many applications, and this makes it more valuable.
For your wooden products and house to stay for long and have a good appearance it needs to be protected. The biggest threat to wood being moisture and insects has to be kept away from the wood. The water particles in the timber increase the rotting and the insects bore through the wood. There are many ways timber is treated among them being the ACQ in other words alkaline copper Quaternary. As the name implies the preservative is made of copper products. There are a few disadvantages of this method as a mode of wood preservation. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.
Another wood treating method that is fast being accepted is the use of copper metal. This method is being accepted fast because is friendly to wooden fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. The difference between this method and the other copper-based methods is that the copper is used as a metal rather than a dissolved material. When this process is used to treat timber the timber properties are increased highly. The wood products protected using this method last longer.
The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. Extensive research over a period of 10 years has proven the effectiveness of this science as one of the best wood preservation methods.